- 1-1/2" O.D.
- Exposed Mounting
- Heavy Duty Stainless Steel
CONSTRUCTION:
-
FLANGES fabricated of type 304 (18-8), 3-1/8" dia. 13 gauge stainless steel, with exposed surfaces in architectural satin finish.
-
TUBING of type 304 (18-8), 1-1/2" O.D. 18 gauge stainless steel, seamless
construction with exposed surfaces in architectural satin finish. Bent ends of tubing
pass thru the flanges and are heliarc welded into a single structural unit for
maximum strength. Intermediate supports are contour cut and joined by heliarc
welding to form an integral part of the grab bar. All welds ground and polished to
blend. Mandrel bending process maintains uniform bar diameter. Return provides
1-1/2" standard safety clearance between wall and bar.
-
STRENGTH:
When properly mounted, all Bradley heavy duty grab bar systems meet or exceed the
requirements of ANSI Standard A117.1, the ADA and ABA Accessibility Guidelines for
Buildings and Facilities (ADAAG) and the Uniform Federal Accessibility Standard (UFAS).
-
INSTALLATION:
Secure to wall where adequate in-wall backing exists. Use bar as template to locate
mounting holes. Drill holes and set anchors as appropriate. Mount grab bar and secure
mounting screws.
If you are looking for a different size or style of Bradley Grab Bar, please contact us toll free: 1-877-894-4884
See the Technical Data Sheet here: 817